FDA Mincer Sausage Maker Stuffer Machine Hand For Home Sausage Making
Sausage Stuffing Directions:
⇒ When you are ready to start stuffing, remove cylinder from frame and fill with your favorite recipe of ground meat
⇒ Slide cylinder back into frame
⇒ Properly prepare casings as directed on casing packaging
⇒ Slip a casing over the end of the funnel tube until the entire length of the casing is on the funnel
⇒ Twist or tie the end to seal the casing
⇒ By rotating the handle clockwise, you will move the piston down and force the sausage mixture down and through the funnel into the casing
⇒ Hold the casing on the sausage tube in one hand and slowly let the meat output pull the casing from the tube
⇒ Fill casing as desired by holding casing back on tube
⇒ While extruding the sausage, hold the casing against the end of the funnel to help pack the sausage firmly into the casing
⇒ Twist or tie the sausage into links as desired
⇒ Tie end of casing into a knot
⇒ Repeat this procedure until you have completed your sausages
Assembly Instructions:
| 1 |
You new vertical stuffer comes partially assembled. |
| 2 |
However, you need to complete a few steps to be ready to begin stuffing your own sausage |
| 3 |
Attach the handle to the stuffer frame by inserting the wing nut through the handle and into the rear of the small horizontal gear |
| 4 |
Turn the wing nut until tight |
| 5 |
You can now turn the handle and actuate the piston |
| 6 |
Turn the handle counter-clockwise so that the center thread rod and piston moves to the top of the stuffer frame |
| 7 |
Stuffing tubes attach to the stuffer cylinder by threading the tube through the ring lock and tightening the ring lock onto the cylinder |
| 8 |
With the center thread rod and the piston at the top of the stuffer frame |
| 9 |
The cylinder can be moved in and out of the base |
Description:
- Heavy duty contruction makes the stuffer easily mounted on any counter-top
- Stainless steel cylinder is easily removed for filling and cleaning
- Stainless steel base with holes for attachment to tabletop
- Heavy-duty piston comes with a stainless steel air-releave valve to let air excape from the cylinder while stuffing sausage
- Including three stuffing tubes in 3/4'', 7/8'' and 1-1/4''.
Specifications:
| Item Number |
ST-604005
|
ST-604010
|
ST-604015
|
| Capacity(lbs/hr) |
5 lb. (2.3kg) |
10 lb. (4.5kg)
|
15 lb.(6.8kg)
|
| Master pack |
1 pc/ctn
|
1 pc/ctn
|
1 pc/ctn
|
| Measure |
11"x8"x17"
260x205x415mm
|
13.7"x9.8"x21"
350x250x535mm
|
13"x11"x23"
340x290x580mm
|
| Weight |
11/10 lb.(5/4.5kgs) |
19.8/17.6 lb.(9/8kgs) |
31/26 lb.(14/12kgs) |
Product Tags:
|
|
FDA Mincer Sausage Maker Stuffer Machine Hand For Home Sausage Making Images
|
